Inpaint black pixels in image filter

  • Home
  • /
  • Inpaint black pixels in image filter

Introduction

Used instruments: Interval figure, Draw delimiter measurements filter, Inpaint black pixels in image filter.

Objects of research: photos with volvox image by 4-times increasing (Volvox.jpeg).

Task: to draw the black parts in the image having restored them according to the surrounding image.
 
NOTE. Tutorial does not contain the information on all the possibilities of the application. Here the optimal way of solving the task set is offered.
 

Step 1. Launch of the application

Launch the Altami Studio application. For launching the application use the Altami Studio sortcut at the workbench or the menu item Start→Programs→Altami Ltd→Altami Studio 3.0. Besides, the application can be launched from a folder into which it was installed (usually it is C:\Program Files\Altami Ltd\Altami Studio 3.0\).
 

Step 2. Opening the file

In Altami Studio application open the file with the image, in order to do that, use the menu item File→Open and mark the file Volvox.jpg. It is in Tutorials\Pictures folder which lies in the main folder of the application. Click the Open button.
 
The following image will appear in the application window:
 
Opened document in the Altami Studio application

Picture 1. Opened document in the Altami Studio application

 

Step 3. Opening of the Filters panels

Call the Filters panel with the help of the Filters→Filters.
 
Opening of the Filters panel

Picture 2. Opening of the Filters panel

 

Step 4. Drawing of the black area

In order to place the interval click the pictogram Add interval to the active document, then point with the left button of the mouse the beginning and end of the interval.
 
Creating of the interval figure

Picture 3. Creating of the interval figure

 
After the interval is created, mark it and click the right button of the mouse. By that, a context menu shall appear. Select in it the Delimiter point (Picture 4).
 
Transformation of the Interval figure into the delimiter
Picture 4. Transformation of the Interval figure into the delimiter

 
Then add to the document the filter Draw delimiter measurements, having used the menu Filters→Work with measurements→Draw delimiter measurements.
 
Adding the Draw delimiter measurements filter
Picture 5. Adding the Draw delimiter measurements filter

 
Click with the right button of the mouse at the image and in the appeared context menu select the point Show measurements (picture 6).
Switching off the Show measurements settings
Picture 6. Switching off the Show measurements settings

 

Step 5. Adding the Inpaint black pixels in image filter to the document

Select in the menu the point Filters→Working with background→Inpaint black pixels in image.
 
Adding the Inpaint black pixels in image filter

Picture 7. Adding the Inpaint black pixels in image filter

 

Step 6. Adjusting the Inpaint black pixels in image filter

Upon marking the Inpaint black pixels in image filter in the Filters panel there appears in the lower part the window with the settings of this filter. Here you can switch on and switch off the filter, having put and having taken away the tick in the check box opposite the enabled parameter.
 
Action of the Recuperation filter

Picture 8. Action of the Recuperation filter

 
Leave the inpaintRadius parameter equal to 3 by default.